Product Functions

1. Segment Timing Function: Up to 8 ON/OFF schedules can be set, executed automatically every day.
2. Interval (Cycle) Timing Function: Set interval and ON duration. Example: “Turn on for 5 minutes every 1 hour”.
3. Countdown Function: After a set time, the socket will switch ON or OFF. Example: “Turn on for 5 minutes, then off automatically”.

Scope of Application

Applicable for controlling pumps, motors, refrigerators, rice cookers, routers, set-top boxes, vivariums, humidifiers, charging devices, automatic irrigation systems, sprayers, aquariums, and similar equipment.

Display Information

• ON: Continuous power output. Screen shows “No Timing”.
• OFF: Continuous power off. Screen shows “No Timing”.
• AUTO ON: Temporarily ON, will switch OFF at preset time (shows “Timing”).
• AUTO OFF: Temporarily OFF, will switch ON at preset time (shows “Timing”).
• Without any timing set, it shows the current time. In countdown/interval mode, it shows the remaining time.

Button Functions

• SET: Enter timing settings. Long press 3 seconds to check or edit phase timing.
• CLOCK / NEXT: Set current time, or jump to the next schedule in phase timing.
• CANCEL: Cancel current setting. Short press clears one schedule; double press clears all. Long press 3 seconds cancels the running program.
• ON/OFF / PREVIOUS: Toggle socket output; or return to previous schedule in phase timing.
• ◀▶: Move cursor; ＋/－: Adjust value; OK: Confirm; RESET: Reset device.

How to Use

Set Clock

1. Press CLOCK to enter clock setting.
2. Use ◀▶ to move the cursor, ＋/－ to adjust values.
3. Press OK to confirm.

Set Phase Timing

1. Press SET to enter phase timing mode.
2. Set ON/OFF time for Group 1.
3. Press NEXT to move to the next group, up to 8 groups.
4. Press OK to finish. The socket will switch daily according to your settings.

Set Interval Timing

Press SET until “interval” mode is shown. Set interval (OFF duration) and ON duration → press OK to confirm.

Set Countdown Timing

Press SET until “count down” mode is shown. Set countdown time → press OK to run once. After countdown ends, it returns to “No Timing”.

Set Power State

Press ON/OFF to toggle between ON / OFF / AUTO → press OK to confirm.

⚠️ Note: After completing settings, the timer keeps its current state and does not switch immediately.

Cancel Timing

Long press CANCEL for 3 seconds to stop the running program and return to “No Timing”. The current ON/OFF state remains unchanged.

Product Specifications

• Rated Voltage: AC 85V ~ 265V
• Power Consumption: < 1W
• Battery: Built-in rechargeable battery
• Maximum Output Current: 20A

Precautions

1. Plug the timer into the wall socket first, then connect the appliance.
2. Do not exceed the maximum load power. One timer can only control one appliance at a time.
3. Do not use as a toy for children.
4. Indoor use only.
5. Do not disassemble. Repairs must be done by professionals.
6. Humidity, vibration, and component failure may affect lifetime and performance.
7. Do not use on critical devices that may cause injury or property damage (e.g., surgical equipment).